Airrus Bora 2024 Spinning 2 PCS

The new Airrus Bora represents the evolution of a best-selling saltwater rod, highly appreciated throughout the Mediterranean area. The AIRrus "multi-modulus" technology, which consists in the application of different types of carbon, with different textile resistance and elastic response in different areas of the blank, is combined with the tried and tested "Magma  Polyacrylonitrile Technology", a resin able to significantly improve the weight-power ratio thanks to the improvement of the tensile strength and the reduction of the ovalisation of the blank under load.

Airrus has designedan ‘oversized’ blank, with a larger diameter than common standards, conceived to minimise deformation in the blank segment from the reel-seat to the first guide. This limits energy dispersion in the hook-setting phase, and significantly reduces tip oscillations after casting, optimising the cast distance and its accuracy. The ‘backbone’, the central part of the ‘blank’ and the ‘tip’ react with a progression under load, which decreases significantly as the load on the rod increases, giving great strength to fight the prey. 

The fully exposed reel-seat increase sensitivity through direct hand/carbon contact. The ‘splitted’ handle design has been revised and improved, reducing the overall weight of the rod.
The AIRrus Bora was the first saltwater spinning rod to use the new Fuji FaZLite guides, with a blue coloured stone with high impact resistance and excellent ability to contain the heat developed by the line during casting. The frame of the guide is model K ‘anti-tangle’ specifically designed to prevent thread tangles when using braided line and casting against the wind, or with lures reaching high speeds during casting. This frame also features the new CC corrosion control treatment, which leaves the anti-corrosion characteristics of the metal frame unaltered, even when scratched.

Each AIRrus Bora is equipped with a series of L.A.B.S. components and CUSTOM hoods that have the function of balancing and improving the overall finish of the product. These components are completely original, not from after-market catalogues, but designed specifically for this series of rods. A new exclusive rod-sock allows the rod to be carried with the reel mounted.

WARNING: Due to the low elasticity carbon fiber and the low % resin used, these rods are not recommended for use by beginner anglers.